According to my Classic Accessories representative, their # CA20087 boat cover is constructed of 100% woven polyester with a 300 x 300 denier rating. The fabric is waterproof and resists mildew and UV rays, and is protected by a 5 year warranty. view full answer...
The Fulton Boat Guide - PVC Construction - 50" Tall item # FGB1500100 is made out of 100% schedule 40 PVC. It is 1/4" thick and is the same grade PVC used in low pressure plumbing in homes. They're meant to provide a frame of reference to help guide the boat onto the trailer. That being said you would have to be trying to break this to get it to fail. view full answer...
The TruXedo Boat Windshield Cover # TX38FR places the polypropylene against the windshield to protect it from scratches. If you were to put the fabric side against the windshield it could hold particles of dirt and debris. While in tow the cover could then move around which would scratch the windshield if this happens. The polypropylene will not grab hold onto dirt like the fabric and reduces the chances of scratches on the windshield. The fabric/carpet material is used on the outside as... view full answer...
The Mini Round LED Boat Accent Light with Cover # TN76VR has 18 gauge wire. When you install this I recommend using the Deka Heat Shrink Butt Connectors # DW05743-5 as the heat shrink wrap will protect your connections better against the elements than a standard butt connector will. view full answer...
I spoke with my contact at Lubrimatic and found that they are compatible. The Lubrimatic marine grease is a calcium sulfonate base that is compatible with the lithium complex grease you are currently using. We actually have an FAQ article that covers this very subject. In the article there is a handy table that lists the compatibility of various grease formulations. I have included a link to the FAQ for you. view full answer...
In regards to the CE Smith Bunkboard Guide-On Kit part # CE27600K75, the brackets and posts are galvanized and the hardware is zinc plated which will do a great job of preventing rust and corrosion. The kit is designed exclusively for use on boat trailers so rust/corrosion protection was not overlooked. We even have some reviews from customers after a year of use and there were no reports of rust or corrosion.
CE Smith doesn't offer a specific warranty time for their products. Their warranty... view full answer...
The Kodiak Disc Brakes for 3,500 lb Axles # KOD59FR have a KodaGuard coating on the brake calipers which gives them a 500 to 600 hour salt spray rating and makes these a great option for trailer owner's who either live near salt water or go boating in salt water and will be exposing the brakes to it. This is combined with the Dacromet finish on the hub-rotors and brackets (which have a 300 to 400 hour salt spray rating) for a setup that's way more durable and resistant to salt than your... view full answer...
Go To Results